Our Aluminum Cleaner & Brightener & Restorer is a high-performance acid substitute with a pH of less than one that acts akin to hydrofluoric and sulfuric acids.
This aluminum coil cleaner is a safer choice since it is non-corrosive to skin. It is the best chemical for cleaning aluminum
As an aluminum brightener cleaner, it removes silicate, limescale, and calcium deposits very well.
As the best aluminum oxidation cleaner, it efficiently eliminates corrosion and oxidation from surfaces, revealing a sparkling clean surface.
It is effective as an aluminum boat hull cleaner, aluminum trailer cleaner restorer, construction materials, and the majority of other aluminum exterior surfaces.
As an aluminum coil cleaner, this aluminum cleaner and brightener eliminates grease, dirt, grime, oxidation, and dust from the fins of cooling units and air conditioners, as well as aluminum or copper coils.
It is often utilized for routinely cleaning coils for reduced power usage and improved performance.
This commercial aluminum oxidation cleaner is unregulated by the DOT. No submission of a risk management EPCRA strategy is needed.
With its cutting-edge formulation, our Aluminum Cleaner & Brightener & Restorer will provide the following features and benefits:
As a non-acid aluminum cleaner, it substitutes for hydrofluoric and sulfuric acid
As the best chemical for cleaning aluminum, it cleans and brightens aluminum that is rusted and corroded
It’s a superior aluminum coil cleaner that eliminates dirt, oxidation, and grime from coils.
It is not skin-corrosive.
It is not controlled by DOT
Developed using non-phosphorous chemistry
No submission of a risk management EPRCA strategy is needed
Designed for use in a wide variety of applications, including:
Aluminum is effectively cleansed of calcium, silicate, and limescale deposits.
Designed for cleaning oxidation off aluminum, thus eliminating corrosion and oxidation, leaving surfaces brilliant and clean.
Cleans the majority of outdoor aluminum surfaces, including aluminum trailers, boats, building materials, and most other outside aluminum surfaces.
Aluminum and copper coils, as well as cooling units and air conditioners, are cleaned thoroughly so as to eliminate any dirt, dust, grease, grime, and oxidation that may have accumulated there.
Always conduct a test in isolated areas before utilizing this cleaner.
Be cautious to use goggles and rubber gloves while handling.
Maximum concentration should be used for tougher cleaning situations.
This Aluminum Cleaner, Brightener, and Restorer can be diluted with up to five parts water and used for light maintenance cleaning, brightening, or restoring, depending on your needs.
First, using a spray bottle, brush, or swab, apply the cleaning solution to the surface that needs to be cleansed, then wait for the solution to completely penetrate the filth, and last, thoroughly rinse the area with pure water. Take care while handling surfaces that are painted.
Utilize a plastic bucket when you need to dilute anything and throw away any extra solution right after you’re done with it.
Avoid anodized aluminum.
- 30, 35 & 55 gallon
- 5 or 6 gallon
- 6×1 gallon
- 4×1 gallon