Cationic Polymer For Sludge Dewatering

SKU: ACD384CS Category:

The precipitation of sludge, silt, organic solids, and clay is hastened by the use of this high performance Cationic Polymer for Sludge Dewatering.

This cationic polymer flocculent was developed for the purpose of expediently and effectively clarifying wastewater in municipal waste treatment facilities as well as industrial waste systems.

It employs a polymer with a high molecular weight to quickly remove suspended debris and solids.

This cationic polymer water treatment formula is simple to handle and dispense, and it will assist to boost the system’s waste-handling capacity and cut running costs by making it more efficient.

When used in the manner specified, this biodegradable liquid cationic polymer is harmless and will not cause any damage to fish or wildlife.

Common uses of this concentrated settling agent include digesters, primary and secondary clarifiers, reservoirs, basins, and settling ponds.

After handling, be sure to properly wash thoroughly.

Put on safety gear, including protective garments, protective gloves, and protective eyewear.

Before reuse, remove contaminated clothes and launder it.


Put this Cationic Polymer for Sludge Dewatering straight into the waste stream before it goes through the clarifier or the settling basin.

Introduce these cationic biopolymers into the system using a drip or pump at a place where there is vigorous agitation.

Use rates of this polymer flocculent might range anywhere from 50 ppm all the way up to 300 ppm (2 quarts up to 3 gallons per 10,000 gallons of waste.)

Continuous drip treatment is advised since it results in the greatest economy and efficacy.

Drip or spray between ten and twenty gallons of this flocculent fluid settling agent per one million gallons of water when treating lagoons or ponds.

To ensure a uniform dispersion of the Cationic Polymer for Sludge Dewatering , either drip it into the waste stream or spray it on the surface.

Available in: 4 x 1 gallon, 6 x 1 gallon, 5 gallon, 6 gallon, 30 gallon, 35 gallon, and 55 gallon.


There are no reviews yet.

Be the first to review “Cationic Polymer For Sludge Dewatering”

Your email address will not be published. Required fields are marked *

Shopping Cart