Commercial Liquid Deicer

Request a Quote

    SKU: ACD277CS Category:

    Commercial liquid deicer is a highly-advanced liquid that is based on potassium acetate salt and has the ability to swiftly penetrate and dissolve ice, snow, and frost accumulations on a broad range of surfaces.

    In addition, our liquid deicer for roads may be used as a pre-treatment up to twelve hours before storms in order to stop buildup.

    This potassium acetate deicer was designed so that no heat is produced, it is non-corrosive and will not damage surfaces or leave a residue, and when it melts, it will not burn neighboring grass.

    The areas on surfaces to which the liquid deicer for driveways has been applied are indicated by a brilliant blue hue, which enables the application to be both uniform and thorough.

    This potassium acetate runway deicer satisfies the standards of AMS 1435B Fluid, Generic, anti icing / deicing for taxiways and runways, making it a perfect choice for airport runway ice management.

    This multi-purpose, high-performance liquid de icer may be used on airport taxiways, loading docks, roads, airport runways, stairs, walkways, bridges, concrete, building roofs, terrazzo, coal conveyors, chains, locks, plastic, rubber, asphalt, linkages, aluminum, hinges, and steel.

    The following are some of the features and advantages provided by this grass safe ice melt :

    Liquid deicer for sidewalks will keep ice and snow from accumulating.

    Airport runway deicer is permitted for use on taxiways and runways at airports.

    The area where commercial liquid deicer has been administered is denoted by a bright blue dye.

    It is non-corrosive to use this liquid deicer.

    Our grass friendly ice melt is harmless to neighboring grasses.

    Liquid deicer for roads is designed to work in temperatures as low as -60 degrees Fahrenheit.


    Conforms to all FAA requirements for SAE AMS 1435B antiicing/deicing fluids for taxiways and runways.

    Instructions For Utilizing Runway Deicing Fluid:

    Use roughly half a gallon of potassium acetate for ice control for every 1,000 square feet of area to avoid the buildup of ice.

    Use roughly 1 gallon per 1,000 square feet for deicing areas with just a thin coating of ice.

    To melt thicker layers, you may need to use more of this commercial liquid deicer.

    Concrete’s pores, chips, and fissures are all potential entry points for the water that results from the melting of snow and ice.

    The repeated cycles of freezing and thawing that this water goes through may then lead to harm being done to the concrete.

    The removal of slush and snow from concrete may help to reduce the severity of this danger.

    Available in:

    4 x 1 gallon, 6 x 1 gallon, 5 gallon, 6 gallon, 30 gallon, 35 gallon, and 55 gallon.


    There are no reviews yet.

    Be the first to review “Commercial Liquid Deicer”

    Your email address will not be published.

    Shopping Cart