Die Grinder Flap Wheel

Ask for price

Add to Quote
SKU: CS31040CAFW Category:

A Die Grinder Flap Wheel may be purchased with a mounted shank.

A mounted flap wheel for drills may have a diameter of three inches and is often seen on portable power equipment.

Deburring, light finishing, and flash removal are the intended uses for abrasive flap wheels.

The sandpaper flap wheel will follow the shape of the workpiece thanks to the flaps in the design.

As the flap wears away, fresh abrasive grain is revealed, and the 3 inch flap wheel maintains its cutting ability throughout the process.

Performance of the Flap Wheel

A mounted flap wheel may be purchased with either a 1/4″ straight or tapered shank.

The most popular shanks for everyday use are a 1/4″ straight shank or a 1/4-20 threaded shank.

Abrasive Material

The amount of pressure that is applied during finishing and grinding with a flap wheel doesn’t justify the use of zirconia or ceramic grain since there would be no noticeable enhancement in performance.

Therefore, aluminum oxide cloth is the standard material of an aluminum oxide flap wheel.

Mounted Aluminum Oxide Flap Wheels

1. Application

When it comes to surface preparation prior to painting, these Aluminum Oxide Mounted Flap Wheels perform really well.

A flap wheel for stainless steel with high-performance aluminum oxide grain allow for rapid stock removal. It is capable of removing sand and paint, grinding, leveling, and stripping surfaces quickly.

A flap wheel for aluminum has high-quality abrasive fabric, which contributes to the wheel’s extended life.

The flap wheel adds an additional degree of flexibility while also allowing for the rapid shaping and finishing of wood.

To smooth off rough edges, deburr, and clean, an aluminum oxide cloth Die Grinder Flap Wheel is your best bet. It is useful for a variety of materials including wood, steel, cast iron, non-ferrous metals, plastics, stainless steel, etc.

2. Instructions for Operation

Make sure you’re using the correct equipment.

Before fastening it, make sure you insert the sanding flap wheel for drills all the way into the tool before you do so.

In order to work effectively with the material, the tool in question must first be operating at maximum speed.

Avoid using too much force.

If you apply too much force, the textile backing may rip.

Resin may break down if subjected to excessive force or striking.

3. Handling

Take extra precautions while handling in order to avoid damaging or ripping the rough flaps.

Before putting anything to use, be sure to give everything a thorough inspection.

4. Information on Safety

Never let the speed get higher than the catalog suggests.

Wear all required personal protective equipment, including gloves, ear plugs, a face mask, and safety glasses while doing hazardous tasks.

Incorrect usage has the potential to result in serious damage.

First, make sure the Die Grinder Flap Wheel is properly fastened and that it is not loose or making any noise before you begin.

5. Storage

The original package should be kept for flap wheels.

Moisture and humidity may cause the shank of steel to corrode.

If You Have A Question Or Want A Quote On These Flap Wheels, Please Contact Us:

  • Mounted Flap Wheel Aluminum Oxide 1″ x 1″ x 1/4″ – Grit: 40, 60, 80, and 120.
  • Mounted Flap Wheel Aluminum Oxide 1-1/2″ x 1″ x 1/4″ – Grit: 40, 60, 80, and 120.
  • Mounted Flap Wheel Aluminum Oxide 2″ x 1″ x 1/4″ – Grit: 40, 60, 80, and 120.
  • Mounted Flap Wheel Aluminum Oxide 3″ x 1″ x 1/4″ – Grit: 40, 60, 80, and 120.


There are no reviews yet.

Be the first to review “Die Grinder Flap Wheel”

Your email address will not be published. Required fields are marked *

Shopping Cart