Snap Ring Assortment

SKU: CS12900PB Category:

Our Snap Ring Assortment includes 300 pieces of spring steel external rings.

To keep pulleys, gears, and wheels in place on shafts, an external snap ring is utilized.

An inverted external retaining ring is also available from our company and can accept components with large chamfers and radii.

This external axial retaining ring is designed to cut down on the length of the lugs around the shaft’s circumference.

Alternatively, for a shaft that is going to be used in an area with limited clearance, you may want to think about using a inverted external retention ring.

The lugs on this type of external retaining ring point inward for a smoother profile and greater clearance than an ordinary exterior snap ring.

You will need retaining ring pliers to open metric snap rings, then you will need to slip the metric retaining ring over the end of a shaft and then release them so that they will spring into the groove.

In addition to that, the assembly of this external axial retaining ring is done axially, and then it is reversed externally.

Ring ID needs to be measured when it is not installed.

In dry settings, the black-phosphate finish of the external rings found in our Snap Ring Assortment offers some corrosion resistance.

Using a shaft that is tougher than the external retaining ring determines the thrust load capacity, also known as PR.

The following sizes and quantities are included in our 300-piece Snap Ring Assortment (CS12900PB,) which is packed in a convenient plastic compartment that is both compact and simple to store:

30 – 1/4″; 20 – 5/16″; 50 – 3/8″; 20 – 7/16″; 50 – 1/2″; 20 – 9/16″; 30 – 5/8″; 35 – 3/4″; 10 – 13/16″; 20 – 7/8″; 10 – 1″; and 5 – 1-1/4″.

295 piece Metric Snap Ring Assortment (CS13980PB):

25 – 6mm; 20 – 8mm; 15 – 9mm; 20 – 10mm; 20 – 11mm; 20 – 12mm; 10 – 13mm; 20 – 14mm; 15 – 15mm; 20 – 16mm; 10 – 17mm; 15 – 18mm; 10 – 19mm; 15 – 20mm; 10 – 21mm; 10 – 22mm; 10 – 24mm; 10 – 25mm; 5 – 28mm; 5 – 30mm; 5 – 32mm; and 5 – 35mm.

Inverted External Retaining Rings Assortment (CS12935PB):

20 each of 1/2″, 9/16″, 19/32″, and 5/8″; 15 each of 11/16″ and 3/4″; and 10 each of 7/8″, 1″, and 1-1/4″.

Reviews

There are no reviews yet.

Be the first to review “Snap Ring Assortment”

Your email address will not be published. Required fields are marked *

Shopping Cart